To ensure your juicer and blender last a long time and stay clean, proper maintenance is essential. While all Happilaff products are designed for easy disassembly and cleaning, following the correct cleaning methods will extend their lifespan even further.
1. Daily Cleaning (Immediately after use)
â Step 1: Rinse immediately after use
Immediately after use, add water to the bottle and shake gently to wash away any remaining juice or food particles. If left for too long, the residue will harden and become difficult to clean.
â Step 2: Wash with neutral detergent
Disassemble the bottle and blade, then wash carefully with neutral detergent and a sponge. The blade is sharp, so it's safer to use a dedicated brush or the corner of a sponge for cleaning.
â Step 3: Rinse thoroughly and dry
Rinse thoroughly to ensure no detergent remains, then turn upside down and air dry. Remaining moisture can lead to mold and odors.
⥠Self-cleaning method (for busy mornings)
Add 200ml of warm water + a few drops of neutral detergent to the bottle, close the lid, and blend on high mode for 5-10 seconds. Discard the soapy water, rinse with clean water, and turn upside down to dry.
2. Cleaning Tips by Model
| Model | Dishwasher Safe | Cleaning Tips |
|---|---|---|
| PC-2105 | Bottle only (yes) | Hand wash blade recommended. Wash immediately after use. |
| PC-2110 | Bottle only (yes) | Use the mill cup dry. Avoid moisture. |
| CH-208 | Yes (Dishwasher safe) | Dishwasher safe. Hand wash blade recommended. |
| PB-01 | Bottle only (yes) | Be careful not to get water on the USB charging port. |
3. Weekly Deep Clean
ð§¹ Baking Soda & Citric Acid Cleaning
Method: Add 200ml of water + 1 tsp baking soda to the bottle and blend for 5 seconds. Then, using citric acid water (200ml water + 1 tsp citric acid), blend similarly and rinse.
Effect: Removes juice stains, odors, and limescale. Doing this once a week will keep it clean.
ð§¹ Deep Cleaning the Blades
Method: Remove the blade and carefully clean any dirt between the teeth with a dedicated brush. For sterilization, you can soak it in diluted dish bleach for 5 minutes, then rinse.
â ïž Blades are very sharp. Always handle with a cloth or gloves.
4. Maintenance Schedule
| Frequency | Task | Key Point |
|---|---|---|
| After each use | Disassemble, warm water wash, and dry | Wash before food dries |
| Once a week | Deep clean with baking soda and citric acid | Reset odors and discoloration |
| Once a month | Check blade condition and seals | Early detection of chips, deformation, or deterioration |
| Once every six months | Wipe motor base | Only wipe with a damp cloth. Do not immerse in water. |
5. Storage and Longevity Tips
| Key Point | Details |
|---|---|
| Store after complete drying | Remaining moisture can cause mold and odors |
| Avoid direct sunlight | Prevents plastic degradation and discoloration |
| Disassemble blades for storage | Prevents blade deterioration and ensures safety |
| Motor part is not water washable | Only wipe with a damp cloth |
| Regularly check gaskets | Deteriorated gaskets can cause leaks |
ð§¹ Happilaff's Easy-to-Clean Design
Frequently Asked Questions (FAQ)
- Q1. I can't get rid of the odor from the bottle. What should I do?
- Using baking soda water (200ml water + 1 tsp baking soda) and blending for 5 seconds, then similarly washing with citric acid water (200ml water + 1 tsp citric acid) is effective. If the odor persists, soak it in baking soda water overnight.
- Q2. My blades are rusting. What should I do?
- You can prevent rust by washing immediately after use and drying completely. If it's already rusted, soaking it in citric acid water and gently scrubbing may help. If the rust is severe, consider replacing the blade.
- Q3. Which parts are dishwasher safe?
- The bottle and lid of the CH-208 are dishwasher safe. For PC-2105, PC-2110, and PB-01, only the bottle is dishwasher safe, but hand washing the blades is recommended. Never put the motor unit in the dishwasher.
- Q4. What should I be aware of when storing for a long time?
- Dry all parts completely before storing. Moisture can cause mold and rust. Store blades in a dedicated case for safety.
Related Articles: Complete Juicer Buying Guide | What's the Difference Between a Juicer and a Blender? | Blender Recommendation Ranking 2026